View this range installed 
Download a simple PDF
version of this page
Download photometrics
for this range in
LDT format
Non corrosive IP65 surface fittings. Diffuser sealed into poured non removable gasket and secured by quick release poly-carbonate clips. Steel geartray finished in white and secured by release catches. There are suspension slots on the geartray for maintenance. Body moulded in light grey polycarbonate. End seals supplied. Metal ceiling fixings give "F" mark classification. Please enquire for low temperature operation. Please refer all 80w enquiries.
Extras - Stainless steel vandal resistant diffuser clips and suspension cables available.
Diffusers - Standard in moulded clear polycarbonate.
Emergency - Three hour maintained integral emergency conversion available. In order to maintain the IP65 rating of the luminaire, all maintained emergency conversions should be integral within the body. If this is not possible due to physical size we will discuss the possibility of a remote box or different gear (e.g. 2 and 4ft twins). Details here.
Ordering details and dimensions (mm)
| Catalogue number | Lamps | A | B | C | F/C |
|---|---|---|---|---|---|
| MTR 1218/+/++ | 1 x 2ft 18w | 100 | 660 | 101 | 490 |
| MTR 1436/+/++ | 1 x 4ft 36w | 100 | 1270 | 101 | 918 |
| MTR 1558/+/++ | 1 x 5ft 58w | 100 | 1570 | 101 | 1220 |
| MTR 1670/+/++ | 1 x 6ft 70w | 100 | 1839 | 101 | 1380 |
| MTR 2218/+/++ | 2 x 2ft 18w | 160 | 660 | 101 | 490 |
| MTR 2436/+/++ | 2 x 4ft 36w | 160 | 1270 | 101 | 918 |
| MTR 2558/+/++ | 2 x 5ft 58w | 160 | 1570 | 101 | 1220 |
| MTR 2670/+/++ | 2 x 6ft 70w | 160 | 1839 | 101 | 1380 |
| MTR 128 T5/+/++ | 1 x 28w T5 | 100 | 1270 | 101 | 918 |
| MTR 154 T5/+/++ | 1 x 54w T5 | 100 | 1270 | 101 | 918 |
| MTR 135 T5/+/++ | 1 x 35w T5 | 100 | 1570 | 101 | 1220 |
| MTR 149 T5/+/++ | 1 x 49w T5 | 100 | 1570 | 101 | 1220 |
| MTR 228 T5/+/++ | 2 x 28w T5 | 160 | 1270 | 101 | 918 |
| MTR 254 T5/+/++ | 2 x 54w T5 | 160 | 1270 | 101 | 918 |
| MTR 235 T5/+/++ | 2 x 35w T5 | 160 | 1570 | 101 | 1220 |
| MTR 249 T5/+/++ | 2 x 49w T5 | 160 | 1570 | 101 | 1220 |
| + = Control Gear options (Mouse over for legend) HF HF DIG DIM HF 1-10v DIM DSI and DALI dimming E (No dimming is available for 70w T8) ++ = Other optionsMTR/SSC MTR/SUS | |||||
 | |||||
Fixing the Fitting
To retain the IP 65 rating of the Meteor fitting, the bodies should not be drilled. Instead the metal clip that is supplied with the fitting should first be attached to the fixing plane (1), and then the fitting should be offered up to the clip and fixed in place by the tension in the clip (2). Please note the fixing centres are for the centre of the clip when attached to the body.
For suspending the fitting there are small triangular metal suspensions that attach to the metal clip, as shown here (the actual suspension cable is an optional extra).
Older news